Tech 1pc Optical Fiber Signal Amplifier Digital Intelligent

Note:

1. NPN: low level negative output, the black wire is equivalent to the negative pole of the power supply during output; PNP: High-level positive output, the black line is equivalent to the positive pole of the power supply during output

2. The normally open and normally closed amplifiers can be switched through the L D switch or in the menu. The NPN output measures the output voltage between brown and black, and the PNP measures the black and blue output voltage.

3. All use DC 12-24V power supply.

Response speed (microseconds): less than 100 Detection distance (mm): reflection 280 on beam 1200 Display detection value: 9999 Adjustable 0-9999 milliseconds/three delay modes Normally open/normally closed adjustable

Sensitivity adjustment method: digital

Luminous intensity adjustment: 3 levels

Threshold and detection value display: digital Upper and lower thresholds can be set

Regional mode: In the detection mode of the menu mode Switch to area detection mode Short press the M key once.

At this time, you can press the +- key to fine-tune the threshold 1 Short press the M button again At this time, you can press the +- key to fine-tune the threshold 2 Can choose output between upper and lower limits Or output outside the upper and lower limits Can be adjusted between normally open and normally closed by the amplifier.